English
Español
Français
Italiano
Nederlands (Dutch)
Norsk
Suomi (Finnish)
Swedish
Русский
日本語 (Japanese)
Support Forums/Technical Support Forums/Mercury/Force Outboards
Answered
Problems with sparks on sparks plugs.
Gama 159
asked this on July 26, 2010 16:37
I have problems with mercury mariner 115 serial number 6632556 which I just have installed two new switch boxs and it was working ok but suddently, when I tried to started, it didn't and it doesn't have sparks in any of the sparks plugs. I will really appreciate if you could tell me what the problem could it be. Thanks!
------------------
Submitted from: http://www.crowleymarine.com/mercury-outboard/parts/278_7.cfm
Comments
Hello check the stator they have lots of problems with them good luck steve.
check lander and ing switch
if it is not the stator or landyard check the trigger. good luck
Dissconnect both kill switch wire from the switch boxs or powerpacks.
The wires are at the top toward the left,I think black with white or yellow stripe.
If that works, you have a bare wire or wires running to your key switch.
If none of that works dva check the stator and trigger wires,also take a look at the regulator.
leaning to trigger or stator my self .. make sure and take a good look at the inside of your flywheel while you have it off ... make sure any magnets arent broken or moving around. i dont remember if mariner has the glued in mags on the rubber strip or not. wouldnt be surprised.
ps. the ignition wires on merc packs are black with white stripe.. brp is yellow.