OMC Cobra Adjusting the Shift Rod
Move the shift rod to NEUTRAL.
Rest the OMC Shift rod height gauge on the housing surface. Screw the shift rod in or out until the upper arm of the gauge contacts the top of the shift rod head, approximately 7 - 13/64" high. Another half turn either way is acceptable to bring the notched side of the head forward.

--------------------------------------------------------------------------------------------------
OMC Cobra Sterndrive Standard Production Models
| ENGINE | HP | DISPLACEMENT LITRE / CID | CYLINDERS | TOOTH COUNT | YEAR |
| 2.3 Litre | 120 | 2.3 / 161 | 4-In-Line | 21:21 | 86-90 |
| 3.0 Litre | 130 | 3.0 / 181 | 4-In-Line | 21:21 | 86-89 |
| 3.0 Litre | 175 | 3.0 / 181 | 4-In-Line | 21:18 | 90-93 |
| 4.3 Litre | 230 | 4.3 / 262 | V-6 | 21:19 | 86-93 |
| 5.0 Litre | 230 | 5.0 / 305 | V-8 | 21:18 | 86-93 |
| 5.7 Litre | 260 | 5.7 / 350 | V-8 | 21:16 | 86-93 |
-------------------------------------------------------------------------------------------------
OMC Cobra Thrust Washers
1986-91 Lower Units with 1-3/16" Prop Shaft Use Thrust Washer #333592
1992-93 Lower Units with 1-1/4" Prop Shaft Use Thrust Washer #126870
---------------------------------
JE-349
LATE MODEL PROP SHOP
SHAFT THRUST WASHER

Replaces OEM # 126870
Eric Schmidt (Eric@crowleymarine.com)
Crowley Marine1401 Ulster St.Denver, CO 80220 303-355-555