You have 1 new message
Welcome Guest ( Login or Register )
Member Rating : There have been no member ratings for this topic
Public Rating : There have been no public ratings for this topic

How to find your Serial, Model, or Casting Number Rate This Topic Topic Options
Message
Posted : 18 Sep 09 15:42

Mercury Outboards
The serial number tag is located on the SWIVEL BRACKET (port or starboard); or, check the INSTRUCTION PLATE, located between the thumb screws above the steering tube.

Mariner Outboards
The serial number tag is located on the top outside edge of the CLAMP BRACKET; or, on top of the SWIVEL BRACKET (port or starboard).

MerCruiser
Engines: The serial number tag is located near the STARTER, by the flywheel housing; or, on the ROCKER ARM or FLAME ARRESTOR COVER.

Transom plates: The serial number tag is located on the INNER TRANSOM PLATE inside the boat; or, on the UPPER SWIVEL PIN.

Sterndrives: The serial number tag is located on the UPPER DRIVE SHAFT HOUSING (starboard side or on the back of the housing).

Johnson/Evinrude
The model number tag is located on the top outside edge of the CLAMP BRACKET; or, on top of the SWIVEL BRACKET (port or starboard).

OMC
The model number tag is located on the ROCKER ARM cover.

Force Casting Number
The cast number is located under the ignition plate on the starboard side of the block, beside the top bypass cover.  The cast number will be either a six-digit number ending in 010 or a number starting with either 800 or 818, ending with C, then a number.  For example: 800-153-C6.

Eric Schmidt (Eric@crowleymarine.com)
 Crowley Marine1401 Ulster St.Denver, CO 80220 303-355-555
1 messages found
« Previous Topic :: Next Topic »
Related Topics
Johnson/Evinrude Model Number Breakdown Started By Eric 21 Sep 09 10:11